Artificial Grass / July 5, 2018 / Lenore
Ensure the perimeter is compacted and below the timber edging by 1 inch. Infill the perimeter with sharp sand and level using a rake. Ensure the sand is level to the top of the timber edging and compact again. For good drainage areas spread a layer of sharp sand to blind over the soil. Next compact the ground using a vibrating plate that can be hired from an equipment hire company. Ensure the perimeter is compacted and level with the timber edging. If you put more work in at this stage your Artificial Grass Lawn will look better as a result.
Make sure the carpet does not crest at the seam and is holding flat over the bonded area. Once the whole length is in place and you are happy with its appearance it is necessary to walk along the join several times to activate the glue and bond the grass to the tape. Weight the seam to ensure good contact with the glue until it cures. The more care taken with the operation the neater and tidier the joint will be.
It is always better to install an artificial grass instead of running your sprinkler for a few hours every day as there is no need to water artificial grass which will reduce your water bill also. With eve increasing demand artificial grass has proved itself to be a superior and durable outdoor flooring surface. It will be so strong to withstand any climatic conditions and if it for sports purposes it will also withstand impact form several missiles even from the fastest bowlers. Moreover the surface of artificial lawn is very comfortable and smooth. They provide safe playing grounds for kids as it comprises of low injury rate even they fall down from a slide or swing.